Een ogenblik a.u.b....
PER MAIL BEREIKBAAR:
info@tonniesbikeshop.nl
TELEFONISCH BEREIKBAAR:
0613731872
ONZE WINKEL BEZOEKEN?
Voor mobiel
Kattenbroekerweg 4, Lunteren
0613731872
info@tonniesbikeshop.nl

Categorie: Mountainbikes

KTM Aera 29 Pro 22S/33S Deore XT

De ultra lichte mtb, ideaal om meerdere terreinen te berijden

Enthousiasme golven loste het KTM gemaakt met de testers. Footed, rustige loop en toch handig genoeg is, op geen enkele manier is de “Osi atleten te ver of te rotsachtig. De carbon frame schijven in deze prijsklasse in gewicht aan de voorkant met een, terwijl nog niet typisch Fuji, heeft de dure variant van RaceHardtails SLM ultra slanke gevallen: bovenbuis en Bereik de juiste licht, bock en stijf carbon frame geknipt extreem lang. De positie voelt snel, racy, bijna meedogenloos op bijgesneden tot de voortstuwing – Eigen Weg is de Cloppenburger Fabrikant: Het Zwarte Woud is niet alleen optisch een koele indruk in de geteste Factory model variant uitrusten het noorderlicht hun fietsen ook de favoriet Sparts van Focus medewerkers uit. Als enige fiets in het testveld wordt ingeschakeld Fonehmen comfort in het zadel. Apropos: dankzij de uitgebalanceerde zitpositie, de Aera voelt zowel up- en downhill goed. Alleen op steile steek maakt de flat met 72,5 ° zitbuishoek voor een iets staart-zware voetstap positie, het voorwiel stijgt eerder. Afgezien van de KTM handelt altijd behendig en snel, eenvoudig wiel-band combo uitlopers naar tussensprints op. Berg neergang is het tijdperk moe en dat is geweldig tracks, zonder ooit het schijnen traag. Bovendien is de stabiele rem zorgt voor een extra portie van veiligheid. Kortom, een solide, zorgeloze uitgerust all-rounder, maar geschikt voor lange marathons en ook comfortabel reizen. gaat volgens het niveau, ondanks dat het niet zo gemakkelijk katwielen de paal! Echter, op steile geeft de testers klaagden dat ze hebben weinig druk op de voorzijde door de uitgestoken stand. Ook downhill beroofd van de “stretch vormen” een beetje behendigheid, die in feite geeft de steile stuurhoek. Bovendien is er een gebrek aan Manitou verende voorvork van leiding: het is weinig gevoelig en verhoogt tevens het totale gewicht. Schrale troost dus aan de voorzijde en de achterzijde is meer onverzettelijke wat voor hardcore racers en puristen die willen elke bult op zijn eigen lichaam te voelen. In de delen met name de Shimano XT shift overtuigd 30-speed. CUS daarom een ​​1 x 11-groep van Sram. Hoewel het lagere aanbod van cursussen op de zeer steile en lange beklimmingen vereist strakke kuiten, omdat anders de klant geniet van de eenvoudige, snelle schakelingen en de rustige soundscape. makkelijk (voeten) en eenvoudig: gewoon de Focus ook blijft. Wendbaarheid en koersvastheid te houden in het omgaan met de balans, maar surft unexcited over het parcours, maar de remmen zijn waarschijnlijk bijten zijn. Mede dankzij de uitgebalanceerde, licht gestrekte zitpositie, de Focus is een genot-atleet die krachtig kan bepalen wanneer het nodig is. Alleen de lichte overwicht van de wielen en het aluminium frame kost enkele punten aftrek. Conclusie: Volledige en veilig in downhill, licht en snel in Uphill – de comfortabele Aera is een zeer succesvol begeleiden tijdens sport en touring.

Olympia Iron sid/GX1 Miche wielen

Boasting the EXPOBICI Design Award 2014 for innovation, Iron is the new fierce model dedicated to XC. The strong character of the frame results in an all round “super racer”. The use of the Ra- ceTrim rigid fork or of the RS-1 with inverted rods by Rock Shox also makes this bike perfect for marathons. This bike immediately catches the eye with the shape of its main tubes and the marked ribbing that literally draw the entire main triangle, with the exception of the lower stays. The choice of design aimed at quality aesthetics and minimal weight, but above all maximum strength. “3D rigidity”, as its known in Olympia, because thanks to the design of its tubes, the structure offers op- timal strength on the three main planes: longitudinal, transversal and sagittal. The head tube joint and bottom bracket are important aspects, featuring a short connecting gusset, which joins the diagonal tube/ saddle tube and horizontal tube/ saddle tube. Two “fins” reflect the design, for high visual impact. Another feature worth noting is the saddle tube, which has been offset with respect to the bottom bracket, and moved slightly forward towards the head tube. This solution increases the rear space for the wheel arch and re- covers precious millimetres in the saddle position, when the seat post is raised (sized at 27.2 mm, without impact on the weight). IRON is monocoque, produced with carbon fibre T1000, M40J and T800s. Its lightweight features (just 1050 g in the S category) are achieved thanks above all to the use of T1000, with an extremely high breaking load, enabling the use of less raw ma- terials and thus lightening the fra- me without affecting resistance. The M40J fibre (used on the head tube with T800s) is unique for its extremely high specific module, 65% greater than that of the most commonly used T700.

The bottom bracket instead uses mainly the T800 fibre. IRON will also be available without the dérailleur clamp, for use with a single speed (SRAM only). The 12 mm thru-axle, PressFitTM 41×92 mm bottom bracket, cables routed inside the frame and the option also of fitting the new electronic XTR, complete the design of this bike.

HIGHLIGHTS

FRAME CARBON
MONOCOQUE T1000,T800S, M40J
INNER CABLES ROUTING
BB PRESSFIT

TECHNICAL SPECS

FRAME: Carbon Monocoque T1000, T800S, M40J
FORK: Fox Float R32 F29 Factory Tap 15 mm
GROUP: Sram XX1
WHEELS: Mavic Crossmax Pro

Scroll to top